This DIY tutorial shows you how to give your dining chairs a fresh look by reupholstering the seat cushion. Many dining chairs have a cushion that can be easily detached, which makes reupholstering a simple project.
Waverly Strands Teal: https://www.onlinefabricstore.net/waverly-strands-teal-fabric-.htm
Cambric Dust Cover: https://www.onlinefabricstore.net/cambric-dust-cover-black-fabric-.htm
2″ High Density Upholstery Foam: https://www.onlinefabricstore.net/2-x-18-x-54-high-density-upholstery-foam-.htm
Dacron Upholstery Padding: https://www.onlinefabricstore.net/1-2-inch-white-dacron-upholstery-deck-padding-.htm
C.S. Osborne Combination Tool: https://www.onlinefabricstore.net/c-s-osborne-combination-tool-.htm
Upholstery Fabric: https://www.onlinefabricstore.net/application-upholstery.aspx#type=Fabric
Upholstery Supplies: https://www.onlinefabricstore.net/application-upholstery.aspx?Type=Supplies
– Upholstery Fabric
– Cambric dust cover fabric (optional)
– Staple gun and staples
– C.S. Osborne Combination Tool
If replacing the cushion:
– 2” upholstery foam
– ½” Dacron Upholstery Deck Padding
– Electric or serrated knife
STEP 1: Remove old upholstery: First take off the cushion. It may be screwed in to the bottom. Turn the cushion over and detach the dust cover. Remove all the staples or tacks that are attaching the dust cover and upholstery fabric. Take note of the way the corners are folded so you can recreate these pleats later. Continue to take off any other layers of fabric and remove all the tacks or staples. If your chair is newer, you may not have to replace the cushion, but this turn of the century chair has a cushion made up of straw and batting, so I’m going to replace it with foam. Strip the seat down to the wooden frame if you’re adding new foam. Your chair may have webbing instead, or a solid plywood base. For this chair, I’m attaching a piece of the cambric below the foam so it doesn’t sag.
STEP 2: Add foam & Dacron padding: Place the frame on the foam and trace around it. Cut the foam out with an electric or serrated knife. You can cut off the top edges to round the sides a little. Place the foam and frame face down on the padding. Cut the padding so it wraps onto the bottom about 2” all around. With the staple gun, staple the padding in the middle of all four sides to hold it in place. Work your way out from the center staple leaving a little space at the corners. Then repeat on the other sides, pulling the fabric taut as you go. For the corners, pull the padding towards the center of the frame and staple. Then staple down the loose padding on either side of the corner. Repeat for the rest of the corners. Trim off all the excess padding.
STEP 3: Attach the upholstery fabric: Lay the fabric out face down. Place the cushion face down on top of it. Cut the fabric so there’s an extra 3 or 4 inches to wrap around the back, make sure the pattern is running straight. Place a staple in the middle of all 4 sides. On each side, work your way out from the center towards the corners. Run your hand over the front as you go to tighten the fabric. Leave a few inches at the corners. If your initial center staple is too loose, just remove it and staple again. For the corners, pull the center of the corner towards the middle and staple. Fold over one edge and staple to form a pleat. Then fold over the other side to form a second pleat. Repeat for all the corners. Trim off all the excess fabric.
STEP 4: Attach the dust cover: This isn’t a necessary step, but it finishes off the bottom nicely. Cut the cambric to the same size as the frame. Fold under the edges and staple.
Hey guys! Today’s mixed media and polymer clay tutorial is for a miniature kitchen! – I’m going to show you how to make the kitchen counters, oven, stove and sink! 🙂 This is perfect for dollhouses – or you can adjust the size to fit other dolls such as Barbie, monster high dolls, LPS and more! ^^ Hope you’ll enjoy this cute craft.
Previous miniature oven/stove tutorial; https://www.youtube.com/watch?v=K2HPtVE8uzA
Have a question? please check out my FAQ; http://scs-craft.blogspot.dk/p/youtube-faq_7.html.
MacLeod is licensed under CC Attribution 3.0.
Direct Link: http://incompetech.com/music/royalty-…
Help me add subtitles?; http://www.youtube.com/timedtext_cs_panel?c=UCtkmv7-kAMyITJkP0-CyQZQ&tab=2
Thank you so much to those of you who’s been helping out!! 🙂
This Old House plumbing and heating expert Richard Trethewey helps a homeowner repair her leaky kitchen faucet. (See below for a shopping list, tools, and steps.)
Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse
Shopping List for How to Repair a Leaky Kitchen Faucet:
– Rubber seats and springs
– Rubber gasket and cam cap
– Ceramic cartridge, to repair a ceramic-cartridge faucet if you have one
Tools List for How to Repair a Leaky Kitchen Faucet:
– Hex-hey wrench, to loosen the hex-head screw
– Pocketknife or narrow-blade screwdriver, to extract faucet parts
– Sharpened pencil, to install new seats and springs
– Spanner wrench
Steps for How to Repair a Leaky Kitchen Faucet:
1. Close the hot- and cold-water shutoff valves under the kitchen sink.
2. Place a rag over the sink drain to catch any dropped parts.
3. Use a pocketknife to pry off the small index cover from the side of the faucet to reveal the hex-head screw.
4. Loosen the screw with the hex-key wrench and pull off the faucet handle.
5. Use the spanner wrench that came with the faucet to loosen and remove top cap assembly.
6. Pull straight up to remove the stainless-steel ball from the faucet body.
7. Use a pocketknife to extract the rubber seats and springs from inside the faucet.
8. Slip a new spring and rubber seat onto the tip of a pencil and lower it down into the faucet. Repeat to install the remaining seat and spring.
9. Reinstall the stainless-steel ball, making sure to align its keyway with the corresponding tab inside the faucet body.
10. On top of the stainless-steel ball install a new rubber gasket and cam cap. Align the keyway on the cap with the corresponding slot to ensure proper alignment.
11. Hand-tighten the top cap assembly back onto the faucet.
12. Open the two shutoff valves under the sink.
13. Use the spanner wrench to tighten the nut to provide the proper tension against the stainless-steel ball.
14. Reinstall the faucet handle, tighten the hex-head screw and then press on the index cover.
15. If your faucet doesn’t have a stainless-steel ball, it’s likely a ceramic-cartridge faucet. To repair the leak, simply remove the handle, pull out the ceramic cartridge and replace it with a new cartridge.
Follow This Old House and Ask This Old House:
HOW TO REPAIR ROOF SHINGLES – Replace Missing Aspahlt Roofing Shingles Step by Step Guide
Part two starts at 9:26
Learn how to perform a DIY (Do It Yourself) roof repair when you have missing or broken shingles on your roof.
Step 1: Using a flat bar, separate the tabs of overlapping shignles 2 rows above and 1-2 shingles left and right, so you can completely remeove the damaged shingle.
Pry up the nails that hold down the damaged shingle.
2) Remove the shigle and replace it with new color mataching shingle.
Most roof manufacturers have similar colors, so as long as your new shingle is the same size as old ones, you are in good shape.
Replace the damaged shingle with new shingle and nail it down with at least 4 galvanazed roofing nails. I recommend using 6 nails per shingle.
Next nail all overlapping shingels above on on the sides
Congrats – you are ALL SET!
Find out how much roofing materials cost cost with Roof Shignels Calculator – http://www.roofcalc.org/roofing-shingles-calculator/
Find local roofing contractors and get up-to 4 free quotes for Roof Repair, Replacement or New Roof Installation – http://www.roofcalc.org/roofing-estimate/
Are you looking for video tutorials on how to seal coat a asphalt driveway? There are many do it yourself driveway sealing tutorials that can be found on the internet. Most are by do it yourself self help websites, some are by big box home improvement stores and some are by the self proclaimed home improvement experts.
The worst way to learn sealing asphalt driveways is to learn from someone who has never actually done the work themselves.
We’re in the driveway sealcoating business… we’ve sealed hundreds of asphault driveways.
We have over 25 videos on how to perform asphalt driveway repair yourself. Including: Driveway patching, driveway crack sealing, how to address oil spots on your driveway, and how to apply the sealer just like the professionals.
Asphalt driveway sealcoating is easy when you know how to do it properly!
Learn how to seal coat a driveway the right way!
Visit our website at http:www.howtosealcoat.com
For You Friends are 8 short tutorials covering how to plant vegetables in a garden. Topics such as plant asparagus, grow cucumbers, harvest tips, planning and preparing plot and more are covered. Happy Gardening Friends.
Invite You to subscribe to my Video Channel: http://goo.gl/wdCj68
UwyoExtension University of Wyoming Extension
Video Channel: https://www.youtube.com/user/UWyoExtension
1) How to Plant Asparagus
2) Grow Leafy Greens
3) Growing Cucumbers
4) Culinary Herbs in the Garden
5) Veggie Harvest Tips
6) Planning the Garden
7) Preparing Your Garden Plot
8) Guide to Ground Covers
Video is licensed under: https://creativecommons.org/publicdom… CC0 1.0 Universal (CC0 1.0) Public Domain Dedication
Invite You To Follow http://plus.google.com Profiles
Anthony Zheng Gao
Wikipedia Reference on Vegatable Garden
Link Licensed under: http://creativecommons.org/licenses/by-sa/3.0/ Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0)
Hi guys! Today we’re making this cute miniature fairy garden ^^ This is a fun project for spring, and you can customize it however you like. I made mine I a Zink tray to keep inside, but you can do this project in a bigger pot to put in your real garden :
I used a flower pot as my fairy house and build a polymer clay door onto it, inspired by the round Hobbit doors. You can add whatever decorations and detail, you like; I added the flower pots and tools I made in this video; https://www.youtube.com/watch?v=esXU3…
Good to know:
I work in 1:12 scale, but you can make them in any size you want and add headpins to make them charms 🙂 I used a mix of the polymer clay brands Fimo and Cernit, but you can use any brand you like. The liquid clay I use is from the brand Fimo. My mold maker is from Siligum/Sili-put.
Thank you so much for watching, I hope you enjoyed this video ^^
You might also like:
Miniature dress Forms tutorial; https://www.youtube.com/watch?v=Tl18A…
Miniature vintage bed tutorial; https://www.youtube.com/watch?v=E5lJF…
Miniature Glitter Shoes tutorial; https://www.youtube.com/watch?v=NR4YY…
Miniature Makeup tutorial; https://www.youtube.com/watch?v=cED2v…
Beauty channel: www.youtube.com/akameru89
Gaming channel: www.youtube.com/akamerurandoms
“Cool Steel Breeze” Jason Shaw (www.audionautix.com)
Licensed under Creative Commons: By Attribution 3.0
Friends, share with You compilation of Basic Gardening Tips for Beginners Videos.
University of Wyoming Extension https://www.youtube.com/user/UWyoExtension/
1. Starting Seed
2. Seed Selection
3. Testing Seed Viability
4. Understand Seed Packet
5. Fall Watering Tips
6. Winter Watering Tips
7. How To Stop Soil Erosion
8. Soil Temperature For Gardeners
9. Fertilizing Tips for house Plants
10. Salt Accumulation
11. Planning Garden Plot
12. Preparing Garden Plot
13. Preventing Weeds with Weeds Barrier
14. Dealing With Houseplant Pest
15. House Pruning
16. Evergreen Pruning
17. Mushrooms Growing
18. Innoculating a Log With Mushrooms
19. Tomato Growing
20. Pumpkin Growing
21. Growing leafy vegetables
22. Growing Peppers
23. Rose Planting
24. Installing Rose Cones
25. Rose Hips
26. Apple Tree Pruning
27. Container Gardening
28. Herb Gardening
29. Culinary Herb Gardening
More Maintenance Tips
30. Choosing the Right Herbicide | From the Ground Up
31. Drainage for Potted Plants
32. Propagating in House Plants
Licensed by: http://creativecommons.org/publicdoma… CC0 1.0 Universal (CC0 1.0) Public Domain Dedication
Hope You like the Gardening Tips and Tricks.
Google Plus Profiles
– Stella San https://plus.google.com/1145124681237…
– Zheng Gao https://plus.google.com/+ZhengGaoAnthony
Other Reading Resources For Gardening
Licensed by: http://creativecommons.org/licenses/by-sa/3.0/ Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0)
Wingsuit Proximity Flying, Big Wave Surfing, Big Mountain Skiing & More on this Top 10 countdown of the Most Extreme Sports! Subscribe here for daily X-Treme Videos: http://goo.gl/NPT1Hz
As Extreme Sports Lovers We Want To Live Fast. Today We Give You a Top 10 Most Extreme Sports, For All The Thrill Seekers. Push Your Limits and Share With Us Your Best Xtreme Experiences!!! Enjoy & feel free to send us your own footage if you’ve filmed something awesome. (email@example.com)
00 :03 | 10 Mountain Bike Double Backflip By Nine Knights http://goo.gl/xuSPSB
00 :13 | 9 Big Air Kitesurfing By Tom Court http://goo.gl/6ipck4
00 :32 | 8 BMX Bangers By Ryys http://goo.gl/BmUQ2D
00 :49 | 7 Kayak Waterfall By Maxime Mitaut http://goo.gl/9bI7An
01 :08 | 6 FMX By Julien Chat & Vincent Saccomani http://goo.gl/fEJ1e7
01 :31 | 5 Big Mountain Skiig By Julien Lopez http://goo.gl/aeglJw
01 :56 | 4 Cliff Base Jumping By Douggs http://goo.gl/5Y9Xna
02 :20 | 3 Big Wave Surf By Helio Valentim http://goo.gl/XsIIRq
02 :40 | 2 Ski Base Jump By Marshall Miller http://goo.gl/ozekov
03 :05 |1 WIngsuit Proximity Flying with Jokke http://goo.gl/tbBx3z
Sk8park — Wally Gagel, Xandy Barry KT196/UNIPPM
Destination Man – David DeMarco, Steven Stern, Stuart Hart SLAM027/UNIPPM
Edit : Anthony Abbadie
The X-Treme Channel features awesome extreme sports action from all over the world!
How to Make an Outdoor Gas Fireplace with DIY Pete. This gas fire pit project is made of concrete. Gas fireplaces of this category can cost thousands of dollars and take a lot of time to build. Building your own outdoor gas fireplace out of concrete will save you time and money. The fire pan kit for either propane or natural gas can be purchased online. Plans and a detailed tutorial are available at http://www.diypete.com/outdoorgasfireplace
Links to products used – Please note some of the links are affiliate links, and going through them will help support the DIY Pete channel
For more info, project photos, and downloadable plans check out:
Download Plans: https://gumroad.com/l/outdoorgasfirep…
Gas Fireplace Burner and Pan: http://amzn.to/1SK6Rf5
Gas Fireplace Glass: http://amzn.to/1XW9U26
Propane Kit: http://amzn.to/1SK78yN
Looking for more DIY videos? Be sure to check out our channel and subscribe for updates! We post a weekly tutorial every Thursday.
Looking for woodworking, concrete working, and other DIY projects plans to follow? You can download plans for free at http://gumroad.com/DIYPETE
1627 W Main Street Suite 182
Bozeman, Montana 59715